Airport Security Fence System – Skyhall Fence
When refer to the airport security fence system, there’s a picture in front of our eyes. High and dangers. That also means the airport security fence system is consist of two parts. Usually the constitution of the airport security fence system is the welded mesh fence and the concertina razor wire.
The welded mesh fence provide a rather higher height of the airport security fence, and the concertina razor wire provide a danger top of the airport fence. However, to make the welded mesh fence and the concertina razor wire a whole, there’s other fittings needed, Y arm and the tension wire. We usually use a Y arm welded with the post of the welded mesh fence, the arm length is changeable but usually design as 500mm, and the angle of the Y arm is less than 90 degree, which will also make the height of the fence system more higher. And the tension wire is also to support the looped razor wire, to make it more durable.
But, the constitution of the airport security fence system is not changeless. No matter the fence panel or the wire on the top of the fence, they can both be changed as customers requirements. The selection of the fence panel and the top wire is based on your purchase budget and security grade.
If you want a rather cheaper fence system, the panel can be changed into euro fence with a thick wire and the wire on the top of the fence can be replaced by the razor wire. If the place need high security requirements, then the panel can be changed into 358 fence also with a higher cost.
All in all, the constitution of the airport security fence system is changeable.
If you are not sure which panel and wire to choose, tell us, and we’ll help you select a proper fence panel and razor wire via your usage. Wish you will be satisfied with the product you want.
Permalink To This Page:http://www.skyhallfence.com/airport-security-fence-system/
Link To Ralated Hot Page:Airport Fence
