Metal Picket Fence Panels
Metal picket fence panels are a kind of decorative fence, and it is made by the square pipes. The metal picket panel is quite good looking in its appearance. This is also why it is very popular among the clients from all over the world.
Metal picket fence is compound by the square metal tubes and the rail, while all these pickets and rail are all square pipes. Some of then are with the spikes on the top, which will be higher security. Some of them are flat top and seems very friendly, which is more often used in the swimming pool. The numbers of the rails is usually made according to the client’s request. Commonly it is 2 rails or 3 rails, which is 2 of rails on the top and one is in the bottom.
The popular specifications for the metal picket panels are as below, the height for the picket fencing can be 1200mm1400mm/1600mm/1800mm/2000mm/2200mm, and it also accepts the clients design; the width for the metal picket fence are 2000mm/2500mm/3000mm, it should be noted that the one side of the metal picket panel shall be no more than 2200mm, because it cannot be loaded on the container. The size for the picket can be 20mm*20mm/25mm*25mm/30mm*30mm, and the wall thick for the picket can be 1.5mm/2.0mm, which can also accept customization; then it is the rail for the metal picket fence panels, the size for the rails are 0mm*40mm/ 50mm*50mm/60mm*60mm; the clamps for the metal picket fence panels are metal clamps.
To prevent the metal picket fence panels from being rusty and make sure the long lifetime of the metal picket fence panels, the surface treatment can select the hot dipped galvanized or the electric galvanized and powder coated. Both of the two surface treatment can protect the fence very well.
Permalink To This Page:http://www.skyhallfence.com/metal-picket-fence-panels/
Link To Related Hot Selling Products:Steel Picket Fence
