When refer to the airport security fence system, there’s a picture in front of our eyes. High and dangers. That also means the airport security fence system is consist of two parts. Usually the constitution of the airport security fence system is the welded mesh fence and the concertina razor wire.

The welded mesh fence provide a rather higher height of the airport security fence, and the concertina razor wire provide a danger top of the airport fence. However, to make the welded mesh fence and the concertina razor wire a whole, there’s other fittings needed, Y arm and the tension wire. We usually use a Y arm welded with the post of the welded mesh fence, the arm length is changeable but usually design as 500mm, and the angle of the Y arm is less than 90 degree, which will also make the height of the fence system more higher. And the tension wire is also to support the looped razor wire, to make it more durable.

But, the constitution of the airport security fence system is not changeless. No matter the fence panel or the wire on the top of the fence, they can both be changed as customers requirements. The selection of the fence panel and the top wire is based on your purchase budget and security grade.

If you want a rather cheaper fence system, the panel can be changed into euro fence with a thick wire and the wire on the top of the fence can be replaced by the razor wire. If the place need high security requirements, then the panel can be changed into 358 fence also with a higher cost.

All in all, the constitution of the airport security fence system is changeable.

If you are not sure which panel and wire to choose, tell us, and we’ll help you select a proper fence panel and razor wire via your usage. Wish you will be satisfied with the product you want.

Permalink To This Page:http://www.skyhallfence.com/airport-security-fence-system/

Link To Ralated Hot Page:Airport Fence

The post Airport Security Fence System appeared first on Home.

High security airport fence, we can easily understand its function from its name. High security airport fence also called airport fence. It’s used as a high security function normally in airport or military zone to prevent people who trying to climb over it. Because of its fittings and parts are a little bit more complex than then normal security fence, we are going to introduce the installation of high security airport fence today.

First step, we need to know if the constructor want to bury the post under ground or need to settle a flange plate. If need to bury type, first we need to measure the distance between two post and dig holes. After digging holes, please set up the post in the holes. If need to make it more stronger, we can also put some concrete in the empty space between post and earth. If choose flange plate type, that will be much easier for installation. Only need to fasten the flange plate on the ground with a normally four anchor bolts.

After setting up the post on the ground, we need to install the high security airport fence panel for next step. The post is like bone of a person, but wire mesh panel just like body of a person. Metal clamp or PVC clamp is for connecting the post and panel with galvanized bolts and nuts. Also same connection method for V shape high security airport fence panel on the top.

Last step is the installation of concertina razor wire on the top. Need to carry the concertina razor wire on the top first, then extend is to suitable length on V panel. Normally the concertina razor wire will be keep the shape after extension, but just in case it change the position, we suggest to tie the concertina razor wire on the V panel with some tie wires.

Permalink To This Page:http://www.skyhallfence.com/high-security-airport-fence/

Link To Related Hot Page:Airport Fence

The post High Security Airport Fence appeared first on Home.

Airport High Security Mesh Fencing is well known as its high security function. It was used wildly in Airport area, army camp and prison, etc which places need high security protection. Airport high security mesh fencing is one of the most popular product series in Skyhall Fence.

The production of airport high security mesh fencing is not very complex. We can regard it as a combination of welded mesh fencing and concertina razor wire. First need to draw the wire rod material to suitable wire thickness and then welded the wires to be a panel with normally 100mm * 50mm mesh or 200mm * 50mm mesh. Folding on panels if necessary to make the fence panel much stronger in horizontal line. The post need to weld a V arm on the top to hold the concertina razor wire. After all prior production done, then we need to make the surface treatment of the airport high security mesh fencing. Most popular finishing are hot dipped galvanized and galvanized + polyester powder coated. This two different surface treatment are all very durable which can be provided with 10 years life time limited warranty by Skyhall Fence.

Technically, there are a lot of different types of airport high security mesh fencing. If change the normal 200mm*50mm or 100mm*50mm mesh panel to be 358 mesh panel, the security level can be higher than before, however, price will increase a little bit. For example, Nigeria market, South Africa market and Singapore market prefer 358 mesh panel in the bottom of the airport high security mesh fencing, but the market in most areas prefer normal welded mesh as the material.

If you need to fence a very important area, airport high security mesh fencing is a very good choice for protecting your property and make the area safe.

Permalink To This Page:airport high security mesh fencing

Link To Related Hot Page:Airport Fence

The post Airport High Security Mesh Fencing appeared first on Home.

Skyhall Fence has a hot sell metal fencing system, called airport fencing system. The application of the airport fencing system just like its name, people usually use the airport fence around the airport site. Airport fence also has other names, just like Y shape high security wire mesh fencing. It is consist of Y shape post, V shape welded wire mesh, strengthen welded wire mesh, connection fittings and pre hot dipped galvanized concertina razor wire. The airport fence is widely used in the site of airport, military base zone, etc,. It use the low carbon steel wire to welded the square wire mesh and V shape wire mesh.

Specification of the airport fencing system from Skyhall Fence

The height of the airport fence from Skyhall Fence can be 2400 mm / 2700 mm / 3000 mm, if our customer has special requirement of the height of the fence, we can also help design and produce.
The width of the airport fence can only be less than 2200 mm per section, because, we need to load the airport fence into the container. The wire diameter of the airport fence can be 4.0 mm / 4.5 mm / 5.0 mm / 5.5 mm / 6.0 mm. The mesh size of the wire mesh can be 100 mm * 50 mm / 200 mm * 50 mm. We always use the 60 mm * 60mm square post, Y shape post to hold the whole wire mesh. The clamp of the airport fence can be Anti Uv plastic clamp, M shape clamp. The V shape arm is 500 mm * 500mm size. And the post cap can be metal cap, anti uv plastic cap. The details of the concertina razor wire can be 500 mm diameter BTO-22.

If you want to strengthen your airport security, the airport fencing system from Skyhall Fence is really a good choice.

Permalink To This Page:http://www.skyhallfence.com/airport-fencing-system/

Link To Related Hot Page:Airport Fence

The post Airport Fencing System appeared first on Home.

There is a high security metal fence from Skyhall Fence called airport security fencing system. It is also named airport fence. We can learn the application of the airport fence from its name, of course, the airport fence can always be seen around the airport. Now let us introduce the details of our airport security fencing system.

Specification of airport security fencing system from Skyhall Fence
The height of the airport fence is always very high, it always not less than 3.0 meters, and there are some high security concertina razor wire on the top of the airport fence panel. So it increase the the height of the whole airport fence. The width of the airport fence must be less than 2.2 meters, because the wire mesh fence panel must has one side less than 2.2mm or equal to 2.2 meters to be loaded in to the container. If it is more than 2.2 meters, it would not be loaded into the container.

Installation of airport security fencing system from Skyhall Fence
The installation of airport security fence from Skyhall Fence is a little complex. The first method, we need to dig holes on the soil ground, and then pre berry the wire mesh Y shape post into the hole, use the metal clamp or anti-uv plastic clamp to fix the airport wire mesh panel to the Y shape post. Put the V shape wire mesh panel on the top of Y shape post, use the plastic clamp the fix the V shape wire mesh panel. The last type is use the lacing wire to fasten the concertina razor wire on the V shape wire mesh panel.

Skyhall Fence is a professional airport security fencing in China. Our high quality of airport fence were sold well in our customers’ market. If you are looking for the airport security fencing system, please come here.

Permalink To This Page:http://www.skyhallfence.com/airport-security-fencing-system/

The post Airport Security Fencing System appeared first on Home.